Danfoss VLT AutomationDrive FC 301 Programming Manual page 35

Parameter Descriptions
0-50 LCP Copy
Option: Function:
[7] Data from LCP to
DYN
[9] Safety Par. from
LCP
0-51 Set-up Copy
Option: Function:
[0] No copy No function
[1] Copy to set- Copies all parameters in the present
up 1 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 1.
[2] Copy to set- Copies all parameters in the present
up 2 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 2.
[3] Copy to set- Copies all parameters in the present
up 3 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 3.
[4] Copy to set- Copies all parameters in the present
up 4 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 4.
[9] Copy to all Copies the parameters in the present set-up
over to each of the set-ups 1 to 4.
3.2.7 0-6* Password
0-60 Main Menu Password
Range: Function:
100 [-9999 - Define the password for access to the Main
*
9999 ] Menu via the [Main Menu] key. If 0-61 Access
to Main Menu w/o Password is set to [0] Full
access, this parameter will be ignored.
0-61 Access to Main Menu w/o Password
Option: Function:
[0] Full access Disables password defined in 0-60 Main
*
Menu Password.
[1] LCP: Read Prevent unauthorised editing of Main Menu
only parameters.
[2] LCP: No Prevent unauthorised viewing and editing
access of Main Menu parameters.
[3] Bus: Read only Read-only functions for parameters on
Fieldbus and/or FC standard bus.
[4] Bus: No access No access to parameters is allowed via
Fieldbus and/or FC standard bus.
[5] All: Read only Read-only function for parameters on LCP,
Fieldbus or FC standard bus.
[6] All: No access No access from LCP, Fieldbus or FC
standard bus is allowed.
®
VLT AutomationDrive FC 301/302 Programming Guide
If Full access [0] is selected then 0-60 Main Menu Password,
0-65 Personal Menu Password and 0-66 Access to Personal
Menu w/o Password is ignored.
NOTICE
A more complex Password protection is
available for OEMs upon request.
0-65 Quick Menu Password
Range:
200 [-9999 -
*
9999 ]
0-66 Access to Quick Menu w/o Password
Option:
[0] Full access
*
[1] LCP: Read
only
[3] Bus: Read
only
[5] All: Read only Read only function for Quick Menu
If 0-61 Access to Main Menu w/o Password is set to [0] Full
access then this parameter is ignored.
0-67 Bus Password Access
Range:
0 [0 - 9999 ] Writing to this parameter enables users to
*
MG33MH02 - Rev. 2013-09-30
Function:
Define the password for access to the Quick
Menu via the [Quick Menu] key. If 0-66 Access
to Quick Menu w/o Password is set to [0] Full
access, this parameter will be ignored.
Function:
Disables the password defined in 0-65 Quick
Menu Password.
Prevents unauthorised editing of Quick
Menu parameters.
Read only functions for Quick Menu
parameters on Fieldbus and/or FC standard
bus.
parameters on LCP, Fieldbus or FC standard
bus.
Function:
unlock the frequency converter from bus/MCT
10 Set-up Software.
3 3
33