Locking The Server - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Basic hardware procedures
4.5.3.4

Locking the server

Figure 27: Locking the server
Ê Insert the key (1) and turn it counter-clockwise (2).
Ê Remove the key from the server front.
Figure 28: Storing the key ring
Ê Insert the key ring into the slot on the server rear (1).
Ê Turn the key ring clockwise by 90 degrees (2) until it latches in place as
shown (3).
Upgrade and Maintenance Manual 73
TX150 S8 / TX200 S7