Maintaining Cables That Connect To Mx960 Dpcs, Mpcs, Mics, Or Pics - Juniper MX960 Hardware Manual

Universal routing platform

Hide thumbs Also See for MX960:

Table of Contents

On a regular basis:

Check the LEDs on PIC faceplates. The meaning of the LED states differs for various PICs. For more

information, see the

MX Series Interface Module

failure, the FPC generates an alarm message to be sent to the Routing Engine.

Issue the CLI show chassis fpc pic-status command. The PIC slots in an FPC are numbered from 0 through

1, top to bottom:

user@host> show chassis fpc pic-status

For further description of the output from the command, see the

Maintaining Cables That Connect to MX960 DPCs, MPCs, MICs, or PICs

For optimum router performance, verify the condition of the cables that connect to the DPCs, MPCs,

MICs, or PICs.

Reference. If the FPC that houses the PIC detects a PIC

DPC 40x 1GE R

10x 1GE(LAN)

MX FPC Type 3

1x OC-192 SONET

Show Quick Links

Table of Contents