Replacing An Mx960 Ac Power Supply Cord; Disconnecting An Mx960 Ac Power Supply Cord; Connecting An Mx960 Ac Power Supply Cord - Juniper MX960 Hardware Manual

Replacing an MX960 AC Power Supply Cord

Disconnecting an MX960 AC Power Supply Cord | 554

1.

Connecting an MX960 AC Power Supply Cord | 554

2.
Disconnecting an MX960 AC Power Supply Cord
To disconnect the AC power cord:
1. Move the AC input switch, which is to the right of the appliance inlet on the chassis, to the off (O)
position.
2. Unplug the power cord from the power source receptacle.
3. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to the ESD point on the chassis.
4. Unplug the power cord from the appliance inlet on the power supply.
SEE ALSO
Preventing Electrostatic Discharge Damage to an MX960 Router
AC Power Cord Specifications for the MX960 Router | 221
MX960 AC Power Supply Description | 130
MX960 AC Power Electrical Safety Guidelines and Warnings
Connecting an MX960 AC Power Supply Cord | 353
Replacing an MX960 AC Power Supply | 537
Connecting an MX960 AC Power Supply Cord
To connect the AC power cord:
1. Locate a replacement power cord with the type of plug appropriate for your geographical location (see
"AC Power Cord Specifications for the MX960 Router" on page
2. Plug the replacement power cord into the corresponding appliance inlet located in the chassis directly
above the power supply.
221).
554