Installing An Mx960 Switch Control Board - Juniper MX960 Hardware Manual

Figure 137: Installing a MX960 Routing Engine
RELATED DOCUMENTATION
Preventing Electrostatic Discharge Damage to an MX960 Router
Replacing Connections to MX960 Routing Engine Interface Ports | 473
Removing an MX960 Routing Engine | 461
MX960 Routing Engine Description | 30

Installing an MX960 Switch Control Board

1. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to the ESD point on the chassis.
2. Carefully align the sides of the Switch Control Board with the guides inside the chassis.
387