Juniper MX960 Hardware Manual page 672

Check the status of each port on a MIC by looking at the LED located on the MIC faceplate. For
information about the meaning of LED states on different MICs, see the MX Series Ethernet Services
Routers Line Card Guide.
Check the status of a MIC by issuing the show chassis fpc pic-status CLI command. The MIC slots in
the MPC are labeled PIC 0/1 and PIC 2/3, top to bottom:
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 1 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 2 Online
PIC 0 Online
PIC 1 Online
Slot 3 Online
PIC 0 Online
PIC 1 Online
Slot 4 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 6 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 10 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
For further description of the output from the command, see the
DPCE 4x 10GE R EQ
1x 10GE(LAN/WAN) EQ
1x 10GE(LAN/WAN) EQ
1x 10GE(LAN/WAN) EQ
1x 10GE(LAN/WAN) EQ
DPCE 40x 1GE R EQ
10x 1GE(LAN) EQ
10x 1GE(LAN) EQ
10x 1GE(LAN) EQ
10x 1GE(LAN) EQ
MS-DPC
MS-DPC PIC
MS-DPC PIC
MPC Type 2 3D EQ
1x 10GE XFP
1x 10GE XFP
MPC 3D 16x 10GE
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
MX960 40GE DPC
10x 1GE
10x 1GE
10x 1GE
10x 1GE
MPC 3D 16x 10GE
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
CLI Explorer.
663