Mx960 Fpc Leds On The Craft Interface; Mx960 Scb Leds On The Craft Interface - Juniper MX960 Hardware Manual

Table 9: DPC and MPC LEDs on the Craft Interface
Label Color
OK Green
–
FAIL Red

MX960 FPC LEDs on the Craft Interface

An FPC takes up two DPC slots when installed in an MX Series router. The LEDs, labeled 0 through 5, 2/6,
and 7 through 11, are located along the bottom of the craft interface. Slot 2/6 is for an additional DPC,
FPC, MPC, or SCB. The LED corresponds to the lowest DPC slot number in which the FPC is installed.
Table 10 on page 21 describes the functions of the FPC LEDs.
Table 10: FPC LEDs on the Craft Interface
Label Color
OK Green
–
FAIL Red

MX960 SCB LEDs on the Craft Interface

Each SCB has two LEDs on the craft interface that indicates its status. The SCB LEDs, labeled 0, 1, and
2/6, are located along the bottom of the craft interface.
the SCB LEDs.
State Description
On Card is functioning normally.
steadily
Blinking Card is transitioning online or offline.
Off The slot is not online.
On Card has failed.
steadily
State Description
On FPC is functioning normally.
steadily
Blinking FPC is transitioning online or offline.
Off The slot is not online.
On FPC has failed.
steadily
Table 11 on page 22 describes the functions of
21