Installing The Mx960 Router; Installing An Mx960 Router Overview - Juniper MX960 Hardware Manual

CHAPTER 16

Installing the MX960 Router

IN THIS CHAPTER

Installing an MX960 Router Overview | 263

Removing Components from the MX960 Router Chassis Before Installing It with a Lift | 265
Tools Required to Install the MX960 Router with a Mechanical Lift | 275
Installing the MX960 Router Using a Mechanical Lift | 276
MX960 Acoustic Cover Installation Instructions | 278
MX960 Extended Cable Manager Installation Instructions | 283
Reinstalling Components in the MX960 Chassis After Installing It with a Lift | 320
Installing an MX960 Router Overview
To install the MX960 router:
1. Prepare your installation site.
See "MX960 Site Preparation Checklist" on page
2. Review the safety guidelines.
General Safety Guidelines for Juniper Networks Devices
General Safety Warnings for Juniper Networks Devices
3. Unpack the router and verify the parts.
a. Unpacking the MX960 Router on page 249
b. Verifying the MX960 Parts Received on page 251
4. Install the mounting hardware.
Installing the MX960 Mounting Hardware for a Four-Post Rack or Cabinet on page 255
Installing the MX960 Mounting Hardware for Front-Mounting in an Open-Frame Rack on page 257
Installing the MX960 Mounting Hardware for Center-Mounting in an Open-Frame Rack on page 260
181.
263