Juniper MX960 Hardware Manual page 420

CAUTION:
allow the fastened loops of a cable to dangle, which stresses the cable at the
fastening point.
CAUTION:
An arc smaller than a few inches in diameter can damage the cable and cause
problems that are difficult to diagnose.
8. Use one of the following methods to bring the PIC online:
Press the PIC offline/online button until the PIC LED lights green. For a PIC installed in FPC3, use a
narrow-ended tool that fits inside the opening that leads to the button.
Issue the following CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see the
The normal functioning status LED confirms that the PIC is online. You can also verify correct PIC
functioning by issuing the show chassis fpc pic-status command described in
PICs" on page 616.
Do not let fiber-optic cables hang free from the connector. Do not
Avoid bending a fiber-optic cable beyond its minimum bend radius.
CLI Explorer.
"Maintaining MX960
407