Juniper MX960 Hardware Manual page 659

Universal routing platform

Hide thumbs Also See for MX960:

Table of Contents

Table 119: MX960 or High-Voltage Second-Generation Universal Power Supply LEDs (continued)

Connected Inputs

PDM connected, power

supply connected

Note: The corresponding appliance inlet located on the power supply is the recommended receptacle when using

the power supply in one feed mode. If using the power supply in two-feed mode, also plug the second power

cord into the receptacle on the power supply.

Note: PDM in the above table stands for Power Distribution Module.

12. Repeat steps 1-12 for installing power supplies in slots 1, 2, and 3, where required.

Table of Contents

Troubleshooting