Compliance Statements For Nebs For The Mx960 Router - Juniper MX960 Hardware Manual

Immunity
EN 55024 +A1+A2 Information Technology Equipment Immunity Characteristics
EN-61000-3-2 Power Line Harmonics
EN-61000-3-3 +A1 +A2 +A3 Power Line Voltage Fluctuations and Flicker
EN-61000-4-2 +A1 +A2 Electrostatic Discharge
EN-61000-4-3 +A1+A2 Radiated Immunity
EN-61000-4-4 Electrical Fast Transients
EN-61000-4-5 Surge
EN-61000-4-6 Immunity to Conducted Disturbances
EN-61000-4-11 Voltage Dips and Sags
The router is designed to comply with the following standards:
NEBS
GR-1089-Core: EMC and Electrical Safety for Network Telecommunications Equipment
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
GR-63-Core: NEBS, Physical Protection
RELATED DOCUMENTATION

Compliance Statements for NEBS for the MX960 Router | 752

Compliance Statements for EMC Requirements for the MX960 Router | 753
Compliance Statements for Environmental Requirements | 754
Compliance Statements for Acoustic Noise for the MX960 Router | 755
Compliance Statements for NEBS for the MX960 Router
The equipment is suitable for installation as part of the Common Bonding Network (CBN).
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (that is, DC-I), as defined in
GR-1089-CORE.
You must provision a readily accessible device outside of the equipment to disconnect power. The device
must also be rated based on local electrical code practice.
752