Installing An Mx960 Fan Tray - Juniper MX960 Hardware Manual

Figure 174: Removing a Lower Fan Tray
SEE ALSO
Preventing Electrostatic Discharge Damage to an MX960 Router

Installing an MX960 Fan Tray | 384

Maintaining the MX960 Fan Trays | 592
Installing an MX960 Fan Tray
To install a fan tray (see
1. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to the ESD point on the chassis.
2. Grasp the fan tray on each side, and insert it straight into the chassis. Note the correct orientation by
the "this side up" label on the top surface of the fan tray.
Figure 135 on page 384 and Figure 136 on page 385):
458