Mx960 Fan Leds On The Craft Interface; Mx960 Cable Manager Description - Juniper MX960 Hardware Manual

Table 11: SCB LEDs on the Craft Interface
Label Color
OK Green
–
FAIL Red

MX960 Fan LEDs on the Craft Interface

The fan LEDs are located on the top left of the craft interface.
of the fan LEDs.
Table 12: Fan LEDs on the Craft Interface
Label Color
FAN Green
Red
RELATED DOCUMENTATION
MX960 Craft Interface Overview | 17
MX960 Alarm Relay Contacts on the Craft Interface | 18

MX960 Cable Manager Description

The standard cable manager (see
has a row of fourteen dividers for securing the cables for each Dense Port Concentrator (DPC), Modular
Port Concentrator (MPC), Modular Interface Card (MIC), or PIC.
State Description
On SCB: Fabric and control board functioning
steadily normally.
Blinking SCB is transitioning online or offline.
Off The slot is not online.
On SCB has failed.
steadily
State Description
On Fan is functioning normally.
steadily
On Fan has failed.
steadily
Figure 9 on page
Table 12 on page 22
23) is a tray located below the line-card cage, which
describes the functions
22