Maintaining Mx240 Pics; Maintaining Cables That Connect To Mx240 Dpcs, Mpcs, Mics, Or Pics - Juniper mx240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide

Maintaining MX240 PICs

Purpose
Action
Related
Documentation

Maintaining Cables that Connect to MX240 DPCs, MPCs, MICs, or PICs

Purpose
Action
372
For optimum router performance, verify the condition of the PICs and PIC cables.
On a regular basis:
Check the LEDs on PIC faceplates. The meaning of the LED states differs for various
PICs. For more information, see the
houses the PIC detects a PIC failure, the FPC generates an alarm message to be sent
to the Routing Engine.
Issue the CLI show chassis fpc pic-status
numbered from through
0
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 1 Online
PIC 0 Online
PIC 1 Online
For further description of the output from the command, see the
MX240 PIC Description on page 57
Troubleshooting the MX240 PICs on page 385
Replacing an MX240 PIC on page 297
MX240 PIC Serial Number Label on page 401
For optimum router performance, verify the condition of the cables that connect to the
DPCs, MPCs, MICs, or PICs.
On a regular basis:
Keep the cable connections clean and free of dust and other particles, which can cause
drops in the received power level. Always inspect cables and clean them if necessary
before connecting an interface.
Label both ends of the cables to identify them.
The following guidelines apply specifically to fiber-optic cables:
MX Series Interface Module Reference
command. The PIC slots in an FPC are
, left to right:
1
DPC 40x 1GE R
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
MX FPC Type 3
1x OC-192 SONET
1x OC-192 SONET
. If the FPC that
.
CLI Explorer
Copyright © 2016, Juniper Networks, Inc.