Installing An Mx960 Routing Engine - Juniper MX960 Hardware Manual

Figure 177: Removing a Routing Engine
SEE ALSO
Preventing Electrostatic Discharge Damage to an MX960 Router
MX960 Routing Engine Description | 30

Installing an MX960 Routing Engine | 385

Replacing Connections to MX960 Routing Engine Interface Ports | 473
Routing Engine Interface Cable and Wire Specifications for MX Series Routers | 195
Installing an MX960 Routing Engine
To install a Routing Engine into an SCB
1. Ensure that the ejector handles are not in the locked position. If necessary, flip the ejector handles
outward.
2. Place one hand underneath the Routing Engine to support it.
(Figure 137 on page 387):
463