Juniper MX960 Hardware Manual page 704

Wait until a message appears on the console confirming that the operating system has halted.
For more information about the command, see request system halt.
3. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to the ESD point on the chassis.
4. Shut down power to the router by pressing the AC input switch or DC circuit breaker for all power
supplies to the off (O) position.
5. Disconnect power from the router.
6. Remove the cables that connect to all external devices.
7. Remove all field replaceable units (FRUs) from the router.
8. Remove the router from the rack:
If you are using a mechanical lift, place the lift platform under the router, unscrew and remove the
mounting screws from the rack, and move the router to the shipping crate.
If you are not using a mechanical lift and the router weight is fully supported by a shelf or another
router, unscrew and remove the mounting screws from the rack. Three people can then lift the router
and move it to the shipping crate.
If you are not using a mechanical lift and the router weight is not fully supported by a shelf or another
router, three people should grasp the router while a fourth person unscrews and removes the mounting
screws from the rack. The three lifters can then move the router to the shipping container.
9. Place the router in the shipping crate or onto the pallet. If on a pallet, bolt the router to the pallet.
10. Cover the router with an ESD bag and place the packing foam on top of and around the router.
11. Replace the accessory box on top of the packing foam.
12. Securely tape the box closed or place the crate cover over the router.
13. Write the RMA number on the exterior of the box to ensure proper tracking.
RELATED DOCUMENTATION
Preventing Electrostatic Discharge Damage to an MX960 Router
697