Mx960 Acoustic Cover Installation Instructions - Juniper MX960 Hardware Manual

RELATED DOCUMENTATION
MX960 Site Preparation Checklist | 181
Tools Required to Install the MX960 Router with a Mechanical Lift | 275
Removing Components from the MX960 Router Chassis Before Installing It with a Lift | 265
Reinstalling Components in the MX960 Chassis After Installing It with a Lift | 320

MX960 Acoustic Cover Installation Instructions

IN THIS SECTION
Installing the Upper Fan Tray Cover | 279
Installing the Interface Module Cage Cover Center-Mount Brackets | 280
Installing the Interface Module Cage Cover Front-Mount Brackets | 281
Installing the Interface Module Cage Cover | 281
Removing the Upper Fan Tray Cover | 282
Removing the Interface Module Cage Cover | 282
This document describes how to remove and replace the acoustic noise covers on a Juniper Networks
MX960 Universal Routing Platform. The upper fan tray cover and interface module cover make up the
acoustic noise components. The two acoustic covers are designed to reduce the system sound level to
comply with the Network Equipment Building System (NEBS). The covers and all associated mounting
hardware are available as an optional upgrade kit.
Tools required:
Number 2 Phillips screwdriver
7/16" wrench
Table 112: Parts List for Acoustic Noise Cover Kit
Component
12–24 1 1/4 in. screws
12–24 nylon lock nuts
Quantity
4
4
278