Connector Pinouts For Mx Series Routing Engine Aux And Console Ports - Juniper MX960 Hardware Manual

Table 84: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port
Pin Signal
1 TX+
2 TX–
3 RX+
4 Termination network
5 Termination network
6 RX–
7 Termination network
8 Termination network
RELATED DOCUMENTATION
MX960 Routing Engine Description | 30
Replacing Connections to MX960 Routing Engine Interface Ports | 473
Replacing an MX960 Routing Engine | 461
RJ-45 Connector Pinouts for MX Series Routing Engine AUX and CONSOLE
Ports
The ports on the Routing Engine labeled AUX and CONSOLE are asynchronous serial interfaces that accept
an RJ-45 connector. The ports connect the Routing Engine to an auxiliary or console management device.
Table 85 on page 201 describes the RJ-45 connector pinout.
Table 85: RJ-45 Connector Pinout for the AUX and CONSOLE Ports
Pin Signal
1 RTS
2 DTR
Description
Request to Send
Data Terminal Ready
201