Connecting Power To An Ac-Powered Mx960 Router With High-Capacity Power Supplies - Juniper MX960 Hardware Manual

RELATED DOCUMENTATION
Grounding the MX960 Router | 334
AC Power Cord Specifications for the MX960 Router | 221
Preventing Electrostatic Discharge Damage to an MX960 Router
Powering On an AC-Powered MX960 Router with Normal Capacity Power Supplies | 341

Connecting Power to an AC-Powered MX960 Router with High-Capacity Power Supplies | 337

Connecting Power to an AC-Powered MX960 Router with High-Capacity
Power Supplies
NOTE: A minimum of two AC nominal 220 VAC 20 amp power cords are required for this
procedure.
To connect the AC power cords to the router (see
1. Verify that the power switch on the power supply is in the off (O) position.
2. Ensure that the release lever below the empty power supply slot is locked in the counterclockwise
position (see Figure 114 on page
Figure 114 on page
338).
338).
337