Mx960 Dense Port Concentrator Leds; Dpcs Supported On Mx240, Mx480, And Mx960 Routers - Juniper MX960 Hardware Manual

Two LEDs, located on the craft interface above the DPC, display the status of the DPC and are labeled
OK and FAIL.
SEE ALSO

MX960 Dense Port Concentrator LEDs | 66

MX960 Field-Replaceable Units | 377
Replacing an MX960 DPC | 485
MX960 Dense Port Concentrator LEDs
Two LEDs, located on the craft interface above the DPC, display the status of the DPC and are labeled
OK and FAIL. For more information about the DPC LEDs on the craft interface, see
MPC LEDs on the Craft Interface" on page
Each DPC also has LEDs located on the faceplate. For more information about LEDs on the DPC faceplate,
see the "LEDs" section for each DPC in the
SEE ALSO
MX960 Dense Port Concentrator Description | 63
Maintaining MX960 DPCs | 598
Replacing an MX960 DPC | 485

DPCs Supported on MX240, MX480, and MX960 Routers

NOTE: These DPCs have all been announced as End of Life (EOL). The End of Support (EOS)
milestone dates for each model are published at
https://www.juniper.net/support/eol/mseries_hw.html.
Table 44 on page 67 lists the DPCs supported by the MX240, MX480, and MX960 routers.
20.
MX Series Interface Module
"MX960 DPC and
Reference.
66