Quick Commissioning Through The Parameter Menu - Siemens SINAMICS V20 Operating Instructions Manual

Commissioning via the built-in BOP
5.5 Quick commissioning
Parameter Access
level
P1120[0] 1
P1121[0] 1
P1058[0] 2
P1060[0] 2
P1061[0] 2
5.5.2

Quick commissioning through the parameter menu

As an alternative to quick commissioning through the setup menu, commissioning using the
parameter menu provides the other solution for quick commissioning. This would be helpful
for those who are used to commissioning the converter in this way.
Quick commissioning methods
● Conventional quick commissioning
This method requires you to complete quick commissioning with all the motor data given
in the parameter setting table below.
● Estimated quick commissioning
This method provides an easier way to complete quick commissioning with limited motor
data. Instead of entering all the motor data, you enter the rated motor power (P0301, in
kW) and then the converter estimates and then sets the values of the rest of the motor
data including P0304, P0305, P0307, P0308, P0310 and P0311.
80
Function Text menu
(if P8553 = 1)
Ramp-up time
(RMP UP)
Ramp-down time
(RMP DN)
JOG frequency
(JOG P)
JOG ramp-up time
(JOG UP)
JOG ramp-down
time
(JOG DN)
Parameter Access Function
level
P1003[0] 2 Fixed frequency
setpoint 3
P2201[0] 2 Fixed PID frequen-
cy setpoint 1
P2202[0] 2 Fixed PID frequen-
cy setpoint 2
P2203[0] 2 Fixed PID frequen-
cy setpoint 3
Operating Instructions, 10/2019, A5E34559884-012
Text menu
(if P8553 =1)
(FIX F3)
(PID F1)
(PID F2)
(PID F3)
SINAMICS V20 Converter