Commissioning via the SINAMICS V20 Smart Access
6.13 Upgrading
Restoring the selected file
1.
2.
6.13
Upgrading
Upgrading on the SINAMICS V20 Web page upgrades the firmware version of the
SINAMICS V20 Smart Access.
There are two upgrading methods for selection:
● Conventional upgrading
● Basic upgrading (applicable when conventional upgrading cannot be performed)
170
Proceed as follows to start restoring.
The restoring process completes when the following window appears. If the Web page
indicates that the restoring fails, you can select to restore again.
Then you can choose to save the parameter settings to the non-volatile memory in the
following window:
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012