Siemens SINAMICS V20 Operating Instructions Manual page 213

Parameter Function
r0206 Rated converter pow-
er [kW]/[hp]
Displays nominal rated motor power from converter.
Dependency: Value is displayed in [kW] or [hp] depending on setting for P0100 (operation for Europe/North America).
r0207[0...2] Rated converter cur-
rent [A]
Displays rated converter current.
Index: [0]
[1]
[2]
Note: The rated high overload (HO) current r0207[2] values correspond to suitable 4-pole Siemens standard
motors (IEC) for the selected load cycle (see diagram). r0207[2] is the default value of P0305 in associa-
tion with the HO application (load cycle).
r0208
Rated converter voltage
[V]
Displays nominal AC supply voltage of converter.
Note: r0208 = 230: 200 V to 240 V (tolerance: -10% to +10%)
r0208 = 400: 380 V to 480 V (tolerance: -15% to +10%)
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012
Range Factory
default
- -
- -
Rated converter current
Rated LO current
Rated HO current
- -
Can be Scaling Data set Data
changed
- - -
- - -
- - -
Parameter list
8.2 Parameter list
Acc.
type Level
Float 2
Float 2
U32 2
211