Function Commissioning; Overview Of Converter Functions - Siemens SINAMICS V20 Operating Instructions Manual

Commissioning via the built-in BOP

5.6 Function commissioning

5.6 Function commissioning
5.6.1

Overview of converter functions

The list below provides an overview of the main functions that the SINAMICS V20 supports.
For detailed description of individual parameters, see Chapter "Parameter list (Page 193)".
● 2/3 wire control (P0727)
● 50/60 Hz customization (Page 62) (P0100)
● Adjustable PWM modulation (P1800 to P1803)
● Analog input terminal function control (P0712, P0713, r0750 to P0762)
● Analog output terminal function control (P0773 to r0785)
● Automatic restart (Page 120) (P1210, P1211)
● BICO function (r3978)
● Blockage clearing mode (Page 113) (P3350 to P3353, P3361 to P3364)
● Cavitation protection (Page 130) (P2360 to P2362)
● Command and setpoint source selection (P0700, P0719, P1000 to r1025, P1070 to
r1084)
● Command data set (CDS) and drive data set (DDS) (r0050, r0051, P0809 to P0821)
● Condensation protection (Page 122) (P3854)
● Continuous boost, acceleration boost and starting boost level control (Page 90) (P1310 to
P1316)
● Converter keep-running operation (P0503)
● Converter status at fault (Page 333) (r0954, r0955, r0956, r0957 and r0958)
This function enables you to read the relevant fault information through parameters
concerned.
● DC coupling function (Page 133)
● DC-link voltage control (Page 106) (P0210, P1240 to P1257)
● Digital input terminal function control (P0701 to P0713, r0722, r0724)
● Digital output terminal function control (P0731, P0732, P0747, P0748)
● Dual ramp operation (Page 132) (r1119 to r1199, P2150 to P2166)
● Economy mode (Page 115) (P1300, r1348)
● Energy consumption monitoring (r0039, P0040, P0042, P0043)
● Fault and warning reaction setting (r0944 to P0952, P2100 to P2120, r3113, P3981)
● Flying start (Page 119) (P1200 to r1204)
● Free function blocks (FFBs) (Page 118) (P2800 to P2890)
● Frost protection (Page 121) (P3852, P3853)
● Hammer start mode (Page 111) (P3350 to P3354, P3357 to P3360)
● Hibernation mode (Page 123) (P2365 to P2367)
84
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012