Siemens SINAMICS V20 Operating Instructions Manual page 319

Parameter Function
r2839.0 BO: NOT-Q D-FF 2
Displays Not-output of D-FlipFlop 2, inputs are defined in P2837[0], P2837[1], P2837[2], P2837[3]. See
r2811 for the bit field description.
Dependency: See P2837
P2840[0...1] BI: RS-FF 1
P2840[0], P2840[1] define inputs of RS-FlipFlop 1, outputs are r2841, r2842.
Index: [0]
[1]
Dependency: P2801[14] assigns the RS-FlipFlop to the processing sequence.
r2841.0 BO: Q RS-FF 1
Displays output of RS-FlipFlop 1, inputs are defined in P2840[0], P2840[1]. See r2811 for the bit field description.
Dependency: See P2840
r2842.0 BO: NOT-Q RS-FF 1
Displays Not-output of RS-FlipFlop 1, inputs are defined in P2840[0], P2840[1]. See r2811 for the bit field description.
Dependency: See P2840
P2843[0...1] BI: RS-FF 2
P2843[0], P2843[1] define inputs of RS-FlipFlop 2, outputs are r2844, r2845.
Index: See P2840
Dependency: P2801[15] assigns the RS-FlipFlop to the processing sequence.
r2844.0 BO: Q RS-FF 2
Displays output of RS-FlipFlop 2, inputs are defined in P2843[0], P2843[1]. See r2811 for the bit field description.
Dependency: See P2843
r2845.0 BO: NOT-Q RS-FF 2
Displays Not-output of RS-FlipFlop 2, inputs are defined in P2843[0], P2843[1]. See r2811 for the bit field description.
Dependency: See P2843
P2846[0...1] BI: RS-FF 3
P2846[0], P2846[1] define inputs of RS-FlipFlop 3, outputs are r2847, r2848.
Index: See P2840
Dependency: P2801[16] assigns the RS-FlipFlop to the processing sequence.
r2847.0 BO: Q RS-FF 3
Displays output of RS-FlipFlop 3, inputs are defined in P2846[0], P2846[1]. See r2811 for the bit field description.
Dependency: See P2846
r2848.0 BO: NOT-Q RS-FF 3
Displays Not-output of RS-FlipFlop 3, inputs are defined in P2846[0], P2846[1]. See r2811 for the bit field description.
Dependency: See P2846
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012
Range Factory
default
- -
0 - 4294967295 0
Binector input: Set
Binector input: Reset
- -
- -
0 - 4294967295 0
- -
- -
0 - 4294967295 0
- -
- -
Can be Scaling Data
changed set
- - -
U, T - -
- - -
- - -
U, T - -
- - -
- - -
U, T - -
- - -
- - -
Parameter list
8.2 Parameter list
Data Acc.
type Level
U16 3
U32 3
U16 3
U16 3
U32 3
U16 3
U16 3
U32 3
U16 3
U16 3
317