Siemens SINAMICS V20 Operating Instructions Manual page 205

Parameter Function
r0038 CO: Filtered power
factor
Displays the filtered power factor.
r0039 CO: Energy con-
sumpt. meter [kWh]
Displays electrical energy used by converter since display was last reset (see P0040 - reset energy con-
sumption meter).
Dependency: Value is reset when P0040 = 1 (reset energy consumption meter).
P0040 Reset energy con-
sumpt. and energy
saved meter
Resets value of r0039 (energy consumption meter) and r0043 (energy saved meter) to zero.
0
1
P0042[0...1] Energy saving scaling
Scales the calculated energy saved value
Index: [0]
[1]
r0043[0...2] Energy saved [kWh]
Displays calculated energy saved
Index: [0]
[1]
[2]
r0050 CO/BO: Active com-
mand data set
Displays currently active command data set.
0
1
2
Note: See P0810
r0051[0...1] CO: Active drive data
set (DDS)
Displays currently selected and active drive data set (DDS).
0
1
2
Index: [0]
[1]
Note: See P0820
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012
Range Factory
default
- -
- -
0 - 1 0
No reset
Reset r0039 to 0
0.000 - 100.00 0.000
Factor for kWh to currency conversion
Factor for kWh to CO2 conversion
- -
Energy saving in kWh
Energy saving in currency
Energy saving in CO2
- -
Command data set 0 (CDS)
Command data set 1 (CDS)
Command data set 2 (CDS)
- -
Drive data set 0 (DDS0)
Drive data set 1 (DDS1)
Drive data set 2 (DDS2)
Selected drive data set
Active drive data set
Can be Scaling Data set Data
changed
- - -
- - -
T - -
T - -
- - -
- - -
- - -
Parameter list
8.2 Parameter list
Acc.
type Level
Float 3
Float 2
U16 2
Float 2
Float 2
U16 2
U16 2
203