Siemens SINAMICS V20 Operating Instructions Manual page 327

Parameter Function
r3237[0...1] CO: Calculated rms DC
ripple voltage [V]
Displays calculated rms dc-link ripple voltage.
Index: [0]
[1]
P3350[0...2] Super torque modes
Selects the super torque function. Three different super torque modes are available:
Super Torque - applies a pulse of torque for a given time to help start the motor
•
Hammer Start - applies a sequence of torque pulses to help start the motor
•
Blockage Clearing - performs a reverse-forward operation to clear a pump blockage
•
Super Torque Operation:
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012
Range Factory
default
- 0
Ripple Volts
Unfiltered Volts
0 - 3 0
Can be Scaling Data
changed set
- - -
T - -
Parameter list
8.2 Parameter list
Data Acc.
type Level
Float 4
U16 2
325