Siemens SINAMICS V20 Operating Instructions Manual page 322

Parameter list
8.2 Parameter list
Parameter Function
P2861 Mode timer 3
Selects mode of timer 3. P2859, P2860, P2861 are the inputs of the timer, outputs are r2862, r2863. See
P2851 for value description.
Dependency: See P2859
r2862.0 BO: Timer 3
Displays output of timer 3. P2859, P2860, P2861 are the inputs of the timer, outputs are r2862, r2863.
See r2811 for the bit field description.
Dependency: See P2859
r2863.0 BO: Nout timer 3
Displays Not-output of timer 3. P2859, P2860, P2861 are the inputs of the timer, outputs are r2862,
r2863. See r2811 for the bit field description.
Dependency: See P2859
P2864 BI: Timer 4
Define input signal of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are P2867, P2868.
Dependency: P2802[3] assigns the timer to the processing sequence.
P2865 Delay time of timer 4 [s]
Defines delay time of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are r2867, r2868.
Dependency: See P2864
P2866 Mode timer 4
Selects mode of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are r2867, r2868. See
P2851 for value description.
Dependency: See P2864
r2867.0 BO: Timer 4
Displays output of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are r2867, r2868.
See r2811 for the bit field description.
Dependency: See P2864
r2868.0 BO: Nout timer 4
Displays Not-output of timer 4. P2864, P2865, P2866 are the inputs of the timer, outputs are r2867,
r2868. See r2811 for the bit field description.
Dependency: See P2864
P2869[0...1] CI: ADD 1
Define inputs of Adder 1, result is in r2870.
Index: [0]
[1]
Dependency: P2802[4] assigns the Adder to the processing sequence.
r2870 CO: ADD 1
Result of Adder 1.
Dependency: See P2869
320
Range Factory
default
0 - 13 0
- -
- -
0 - 4294967295 0
0.0 - 9999.9 0.0
0 - 13 0
- -
- -
0 - 4294967295 0
Connector input 0 (CI 0)
Connector input 1 (CI 1)
- -
Can be Scaling Data
changed set
U, T - -
- - -
- - -
U, T - -
U, T - -
U, T - -
- - -
- - -
U, T 4000H -
- - -
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012
Data Acc.
type Level
U16 3
U16 3
U16 3
U32 3
Float 3
U16 3
U16 3
U16 3
U32 3
Float 3