2790 Pci Integrated Netfinity Server; 2791 Integrated Xseries Server - IBM i series Handbook

Hide thumbs Also See for i series:

Table of Contents

I/O Processor

#2790 PCI Integrated Netfinity Server

The #2790 PCI Integrated Netfinity Server contains a 700 MHz slot 1 processor and four

memory slots in the Netfinity IOP.

The #2791 Integrated xSeries Server contains an 850 MHz Socket 370 processor and four

memory slots in the Netfinity IOP.

The #2790/#2791 is supported in the CEC of Models 820, 830, 840, SB2, and SB3, in the

#5074 PCI Expansion Tower, in the #5078 PCI Expansion Unit, in the #5079 1.8m PCI I/O

Expansion Tower, and in the #5075 PCI Expansion Tower when it is attached to the Model

Each memory slot can contain either a 128 MB, a 256 MB, or a 1024 MB Netfinity IOP

Memory card. This provides a total memory capacity ranging from 128 MB to 4 GB.

Note: When the maximum memory is installed, only 3712 MB will be addressable.

At least one memory card in the Netfinity IOP is required.

The feature numbers of the Netfinity IOP memory cards are:

• #2795 - 128 MB Netfinity IOP Memory

• #2796 - 256 MB Netfinity IOP Memory

• #2797 - 1 GB Netfinity IOP Memory

At least one LAN IOA is required. Refer to the "PCI Card Placement Rules" chapter of the

iSeries and AS/400e System Builder , SG24-2155, for details and limitations.

The #2790/#2791 supports up to three, in any combination, of these LAN IOA features:

• #2743 PCI 1Gbps Ethernet IOA

• #2760 PCI 1Gbps Ethernet UTP IOA

• #4838 PCI 100/10 Mbps Ethernet IOA

• #2744 PCI 100 Mbps Token-Ring IOA

iSeries Handbook

Allowable Main Storage Increments (MB)

Show Quick Links

Table of Contents