Function Of Keypad Keys In Operating Mode - Lenze i55AE125B Manual

16.1.1.2

Function of keypad keys in operating mode

In the operating mode, the keypad can be used for local control and for manual setpoint selec-
tion.
Function of keypad keys in operating mode
Key Actuation
Shortly
Shortly
Shortly
More than 3 s
Shortly
Shortly
Shortly
CTRL
Shortly
R F
Example: Change setpoint
If the setpoints are selected manually via keypad, the frequency setpoint can be changed in
the operating mode via the arrow keys (even while the motor is running):
Operating mode
VEL: KPD: KPD
0 0 0 S T O P
LOC MAN
Condition
Local keypad control active.
Display "LOC"
Remote control active
Display "REM"
Display "KSTOP"
No Jog operation
Operating mode
None (anytime possible)
During operation
Manual setpoint selection via keypad
active.
Display "MAN"
Operating mode
Local keypad control active.
Display "LOC"
Editing mode
P202.01
0 0 0 O
LOC MAN
Editing mode is automatically quit after 3 s of inactivity
Operate and parameterise the inverter with keypad
Action
Run motor.
Deactivate keypad triggered stop.
The motor remains at standstill.
Display changes from "KSTOP" to "STOP".
Stop motor.
Display "KSTOP"
Change to parameterisation mode.
4Keypad parameterisation mode
Save parameter settings in the user memory of the memory
module.
Scroll through information in the above status line.
Change frequency setpoint.
Activate full keypad control
Display "ON?" à Confirm with
Control and setpoint selection can now only be carried out via
keypad.
Renewed clicking: Exit full keypad control.
Display "OFF?" à Confirm with
4Keypad - Configuration of R/F and CTRL buttons
Reversal of rotation direction.
Display "REV?" à Confirm with
4Keypad - Configuration of R/F and CTRL buttons
Change settings
Hz
2 O O
Appendix
Keypad operating mode
^ 635
^ 423
^ 423
P202.01 Hz
0 0 0 O 3 5 6
LOC MAN
633