Parameter Setting - Lenze i55AE125B Manual

Commissioning

Parameter setting

5.3 Parameter setting
As a part of a machine with a speed-variable drive system, the inverter must be adapted to its
drive task. The adaptation process of the inverter is carried out by changing parameters.
Optionally these parameters can be accessed by means of the keypad or »EASY Starter«. If the
inverter is provided with a network option, access can also be effected by a higher-level Con-
troller via the corresponding network.
Certain device commands or settings which might cause a critical state of the
drive behaviour can only be carried our when the inverter is inhibited.
76