Table of Contents
Advertisement
IMPORTANT: Limited alerting and monitoring is available through iLO when HPE Agentless Management
Service is installed. The HPE Smart Array P824i-p MR Gen10 controller supports limited alerts through iLO
using the AMS agent.
•
Maintaining: Using MR Storage Administrator, you can perform system maintenance tasks, such as updating the
controller firmware.
•
Troubleshooting: MR Storage Administrator displays information related to drive failures, device failures, and other
issues. It also provides recommendations and displays contextual links, helping you to locate the drives/devices that
have issues and troubleshoot them. You can also download a report of the devices and their configurations, properties,
and settings and send it to Hewlett Packard Enterprise Support for further troubleshooting.
Obtain MR Storage Administrator installation files through the Service Pack for ProLiant, or SPP, which you can download
from the Hewlett Packard Enterprise website (https://www.hpe.com/servers/spp/download). Be sure to use the latest
SPP version for the server.
For more information about the MR Storage Administrator, see MR Storage Administrator User Guide on the Hewlett
Packard Enterprise website (https://www.hpe.com/info/P824i-pdocs).
HPE InfoSight for servers
The HPE InfoSight portal is a secure web interface hosted by HPE that allows you to monitor supported devices through a
graphical interface.
HPE InfoSight for servers:
•
Combines the machine learning and predictive analytics of HPE InfoSight with the health and performance monitoring
of Active Health System (AHS) and HPE iLO to optimize performance and predict and prevent problems
•
Provides automatic collection and analysis of the sensor and telemetry data from AHS to derive insights from the
behaviors of the install base to provide recommendations to resolve problems and improve performance
For more information on getting started and using HPE InfoSight for servers, go to: https://www.hpe.com/info/
infosight-servers-docs.
StorCLI
The Storage Command Line Interface (StorCLI) tool is the command line management software designed for the HPE
Smart Array MR controller. StorCLI is a command line interface that is designed to be easy to use, consistent, and easy to
script.
Obtain StorCLI through the Service Pack for ProLiant, or SPP, which you can download from https://www.hpe.com/
servers/spp/download. Be sure to use the latest SPP version for the server.
For more information about StorCLI, see StorCLI User Guide on the Hewlett Packard Enterprise website https://
www.hpe.com/info/P824i-pdocs.
139
Diagnostic tools
Advertisement
Table of Contents
