Cabling
HPE ProLiant Gen10 DL Servers Storage Cabling Guidelines
When installing cables, observe the following:
•
All ports are labeled:
◦
System board ports
◦
Controller ports
◦
12G SAS Expander ports
•
Most data cables have labels near each connector with destination port information.
•
Some data cables are pre-bent. Do not unbend or manipulate the cables.
•
Before connecting a cable to a port, lay the cable in place to verify the length of the cable.
•
When routing cables from the front to the rear of the server, use the cable channels on either side of the chassis.
Cabling diagrams
Use the following tables to find cabling information and diagrams. For additional cabling configurations, see the Hewlett
Packard Enterprise website (https://www.hpe.com/info/CablingMatrixGen10).
Table 3: SAS/SATA kits
Option kit
Front 2 SFF SATA side by side (LFF)
Front 2 SFF SAS/SATA drive cage (SFF) 869826-001
Front 2 SFF SAS/SATA 1U drive cage
(LFF)
Front/rear 2 SFF 2Premium SAS (SFF +
LFF)
Front 4 LFF SAS/SATA drive cages
Cable part number
From
1
882066-001
Drive backplane System board
2
Drive backplane •
2
869826-001
Drive backplane •
1
P00698-001
Drive backplane System board
2
869827-001
Drive backplane •
To
Power cable part
number
869810-001
869810-001
SAS
expander
869825-001
•
Controller
SAS
869810-001
expander
•
Controller
869810-001
SAS
869825-001
expander
•
Controller
Table Continued
Cabling
7
7
7
7
7
7
144