ABB ACS580 Firmware Manual page 192

188 Parameters
No. Name/Value
Embedded fieldbus
20.02 Ext1 start trigger
type
Edge
Level
20.03 Ext1 in1 source
Not selected
Selected
DI1
DI2
DI3
DI4
DI5
DI6
Reserved
Timed function 1
Timed function 2
Timed function 3
Reserved
Supervision 1
Supervision 2
Supervision 3
Other [bit]
20.04 Ext1 in2 source
20.05 Ext1 in3 source
20.06 Ext2 commands
Not selected
Description
The start and stop commands are taken from the embedded
fieldbus interface.
Note: Set also 20.02 Ext1 start trigger type
Defines whether the start signal for external control location
EXT1 is edge-triggered or level-triggered.
Note: This parameter is not effective if a pulse-type start
signal is selected. See the descriptions of the selections of
parameter 20.01 Ext1 commands.
The start signal is edge-triggered.
The start signal is level-triggered.
Selects source 1 for parameter
0 (always off).
1 (always on).
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Bit 0 of 34.01 Timed functions status
Bit 1 of 34.01 Timed functions status
Bit 2 of 34.01 Timed functions status
Bit 0 of 32.01 Supervision status
Bit 1 of 32.01 Supervision status
Bit 2 of 32.01 Supervision status
Source selection (see Terms and abbreviations
Selects source 2 for parameter
For the available selections, see parameter
source.
Selects source 3 for parameter
For the available selections, see parameter
source.
Selects the source of start, stop and direction commands for
external control location 2 (EXT2).
See also parameters 20.07...20.10. See parameter
the determination of the actual direction.
No start or stop command sources selected.
to Level.
20.01 Ext1 commands.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(see page 255).
(see page 255).
(see page 255).
(see page 248).
(see page 248).
(see page 248).
on page 144). -
20.01 Ext1 commands.
20.03 Ext1 in1
20.01 Ext1 commands.
20.03 Ext1 in1
20.21
Def/FbEq16
14
Level
0
1
DI1
0
1
2
3
4
5
6
7
7...17
18
19
20
21...23
24
25
26
DI2
Not selected
Not selected
for
0