ABB ACS580 Firmware Manual page 307

No. Name/Value
50.04 FBA A ref1 type
Speed or frequency
Transparent
General
Torque
Speed
Frequency
50.05 FBA A ref2 type
Speed or frequency
Transparent
General
Torque
Speed
Frequency
50.06 FBA A SW sel
Auto
Transparent mode
Description
Selects the type and scaling of reference 1 received from
fieldbus adapter A. The scaling of the reference is defined by
parameters 46.01...46.04, depending on which reference
type is selected by this parameter.
Type and scaling is chosen automatically according to the
currently active operation mode as follows:
Operation mode
(see par. 19.01)
Speed control
Torque control
Frequency control
No scaling is applied.
Generic reference without a specific unit.
The scaling is defined by parameter
The scaling is defined by parameter
The scaling is defined by parameter
Selects the type and scaling of reference 2 received from
fieldbus adapter A. The scaling of the reference is defined by
parameters 46.01...46.04, depending on which reference
type is selected by this parameter.
Type and scaling is chosen automatically according to the
currently active operation mode as follows:
Operation mode
(see par. 19.01)
Speed control
Torque control
Frequency control
No scaling is applied.
Generic reference without a specific unit.
The scaling is defined by parameter
The scaling is defined by parameter
The scaling is defined by parameter
Selects the source of the Status word to be sent to the
fieldbus network through fieldbus adapter A.
Source of the Status word is chosen automatically.
The source selected by parameter
transparent source is transmitted as the Status word to the
fieldbus network through fieldbus adapter A.
Parameters 303
Reference 1 type
Speed
Speed
Frequency
46.03 Torque scaling.
46.01 Speed scaling.
46.02 Frequency scaling. 5
Reference 2 type
Torque
Torque
Torque
46.03 Torque scaling.
46.01 Speed scaling.
46.02 Frequency scaling. 5
50.09 FBA A SW
Def/FbEq16
Speed or
frequency
0
1
2
3
4
Speed or
frequency
0
1
2
3
4
Auto
0
1