Diagnostics - ABB ACS580 Firmware Manual

No. Name/Value
04.16 Latest warning
0000h...FFFFh
04.17 2nd latest warning
0000h...FFFFh
04.18 3rd latest warning
0000h...FFFFh
05

05 Diagnostics

05.01 On-time counter
0...65535 d
05.02 Run-time counter
0...65535 d
05.04 Fan on-time
counter
0...65535 d
05.10 Control board
temperature
-100... 300 °C or °F Control board temperature in degrees Celsius or Fahrenheit.
05.11 Inverter
temperature
-40.0...160.0%
Description
Code of the 1st stored (non-active) warning.
1st stored warning.
Code of the 2nd stored (non-active) warning.
2nd stored warning.
Code of the 3rd stored (non-active) warning.
3rd stored warning.
Various run-time-type counters and measurements related to
drive maintenance.
All parameters in this group are read-only unless otherwise
noted.
On-time counter. The counter runs when the drive is
powered.
On-time counter.
Motor run-time counter. The counter runs when the inverter
modulates.
Motor run-time counter.
Running time of the drive cooling fan. Can be reset from the
control panel by keeping Reset down for over 3 seconds.
Cooling fan run-time counter.
Measured temperature of the control board
Estimated drive temperature in percent of fault limit. The fault
limit varies according to the type of the drive.
0.0% = 0 °C (32 °F)
100.0% = Fault limit
Drive temperature in percent.
Parameters 151
Def/FbEq16
-
1 = 1
-
1 = 1
-
1 = 1
-
1 = 1 d
-
1 = 1 d
-
1 = 1 d
-
1 = unit
-
1 = 1%