ABB ACS580 Firmware Manual page 239

No. Name/Value
DI4
DI5
DI6
Other [bit]
28.82 Shape time 1
0.000...1800.000 s
28.83 Shape time 2
0.000...1800.000 s
Description
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Source selection (see Terms and abbreviations
Defines the shape of the acceleration and deceleration ramps
used with the set 1.
0.000 s: Linear ramp. Suitable for steady acceleration or
deceleration and for slow ramps.
0.001...1000.000 s: S-curve ramp. S-curve ramps are ideal
for lifting applications. The S-curve consists of symmetrical
curves at both ends of the ramp and a linear part in between.
Acceleration:
Speed
Linear ramp:
28.82 = 0 s
Deceleration:
Speed
Linear ramp:
28.82 = 0 s
Linear ramp:
28.82
Ramp shape at start and end of acceleration and
deceleration.
Defines the shape of the acceleration and deceleration ramps
used with the set 2. See parameter
Ramp shape at start and end of acceleration and
deceleration.
status, bit 3).
status, bit 4).
status, bit 5).
on page 144). -
Linear ramp:
28.82 = 0 s
S-curve ramp:
28.82 > 0 s
S-curve ramp:
28.82 > 0 s
S-curve ramp:
28.82 > 0 s
S-curve ramp:
28.82
= 0 s
28.82 Shape time
Parameters 235
Def/FbEq16
5
6
7
0.100 s
Time
> 0 s
Time
10 = 1 s
0.100 s
1.
10 = 1 s