Start-Up, Control With I/O And - ABB ACS580 Firmware Manual

8 Introduction to the manual
Target audience
The reader is expected to know the fundamentals of electricity, wiring, electrical
components and electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations in the United States are given.
Purpose of the manual
This manual provides information needed for designing, commissioning, or operating
the drive system.
Contents of this manual
The manual consists of the following chapters:
• Introduction to the manual
audience, purpose and contents of this manual. At the end, it lists terms and
abbreviations.
• Start-up, control with I/O and ID run
as well as how to start, stop, change the direction of the motor rotation and adjust
the motor speed through the I/O interface.
• Control panel (page 33) contains instructions for removing and reinstalling the
assistant control panel and briefly describes its display, keys and key shortcuts.
• Settings, I/O and diagnostics on the control panel
simplified settings and diagnostic functions provided on the assistant control
panel.
• Control macros
with a connection diagram. Macros are pre-defined applications which will save
the user time when configuring the drive.
• Program features
settings, actual signals, and fault and warning messages.
• Parameters (page 143) describes the parameters used to program the drive.
• Additional parameter data
parameters.
• Fieldbus control through the embedded fieldbus interface (EFB)
describes the communication to and from a fieldbus network using the embedded
fieldbus interface of the drive.
• Fieldbus control through a fieldbus adapter
communication to and from a fieldbus network using an optional fieldbus adapter
module
(this chapter, page 7) describes applicability, target
(page 59) contains a short description of each macro together
(page 85) describes program features with lists of related user
(page 345) contains further information on the
(page 13) describes how to start up the drive
(page 39) describes the
(page 427) describes the
(page 399)