Rear Brake Fluid (Dink 125 Only) - KYMCO DINK 125 Service Manual

15
. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
REAR BRAKE FLUID
(Dink 125 only)
Check
Brake fluid:
Brake hose:
Cracks/wear/damage → Replace.
Apply the brake lever several times.
Fluid leakage → Replace.
Brake hose clamp:
Loosen → Tighten
FLUID REPLACEMENT/AIR
BLEEDING
＊
● A contaminated brake disc or pad
reduces stopping power. Discard
contaminated pads and clean a
contaminated disc with a high quality
brake degreasing agent.
● Do not allow foreign material to enter
the system when filling the reservoir.
● Avoid spilling brake fluid on painted,
plastic or rubber parts. Place a rag over
these parts whenever the system is
serviced.
Once the hydraulic system has been opened,
or if the brake feels spongy, the system must
bled. When using a commercially available
brake bleeder, follow the manufacturer's
operating instructions.
15-5
DINK 50/125