Replacement Of The Film Pocket Sucker Bar Motor M15 - Kodak Miniloader 2000 Service Manual

SM 3477

REPLACEMENT OF THE FILM POCKET SUCKER BAR MOTOR M15.

1
. Switch off the ML2000 (ML2000 P).
2
. Take off the PANELS.
3
. Take out the FILM CHUTE.
4
. Cut the WIRE TIE and unplug the FILM POCKET MOTOR.
5
. Take out the 4 MOUNTING SCREWS.
6
. Install the new FILM POCKET MOTOR.
FUNCTION TEST.
1
. Take out all MAGAZINES.
2
. Check that the FILM POCKET SUCKER BAR ARM moves forward and backward.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU ......................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed ............................ press ENTER
UNIT DATA are displayed ..................................................................... press ENTER
Select COMPONENT TEST ................................................................... press ENTER
Select MAGAZINE MOTORS ............................................................... press ENTER
Select FILM PICK UP MAGAZINE M15 ............................................ press ENTER
Select forward and backward
KODAK AG, Stuttgart
Use the DOWEL PIN and the GEAR from the old MOTOR.
figure 2-17
NOTE
2-21
REPLACEMENTS
6/97