Kodak Miniloader 2000 Service Manual page 79

SM 3477
Select CHANGE PARAMETER ............................................................. press ENTER
Select SCAN RUN ..................................................................................... press ENTER
Select NEARLY EMPTY........................................................................... press ENTER
Select STORE PARAMETERS ................................................................ press ENTER
Select RETURN TO MAIN MENU ....................................................... press ENTER
Select COMPONENT TEST .................................................................... press ENTER
Select MAGAZINE MOTORS................................................................. press ENTER
85.
Exit the SERVICE PROGRAM.
Press BACKSPACE 3 times
Select LEAVE COMPONENT TEST ..................................................... press ENTER
Select QUIT ML2000 SERVICE MODE ............................................... press ENTER
Select Quit the program ............................................................................ press ENTER
86.
Do a FUNCTION TEST
87.
Enable the CONTINUOS LOOP MODE.
Move SWITCH S1-1 on PCB A1 to the ON (up) position.
Select FUNC at the OPERATORS DISPLAY
Select SYSTEM at the OPERATORS DISPLAY
Select CONTIN at the OPERATORS DISPLAY
Select CLEAR at the OPERATORS DISPLAY
88.
Insert a MAGAZINE loaded with TEST FILMS.(use small and large film sizes)
89.
Run approximately 30 cycles.
90.
Observe the various movements of the FILM POCKET.
KODAK AG, Stuttgart 3-33
ADJUSTMENTS
6/97