Replacement Of The Cassette Opener Solenoid Y4 - Kodak Miniloader 2000 Service Manual

SM 3477
FUNCTION TEST.
BE CAREFUL WHEN WORKING IN THE CASSETTE OPENER AREA. THE OPENER MOTOR AND
THE OPENER MECHANISM ARE VERY STRONG. THEY CANNOT BE MOVED MANUALLY. THEY
MAY SQUEEZE YOUR HAND AND TRAP YOU IF YOU TRY TO STOP THEM MANUALLY. NEVER
START THE CASSETTE OPENER MOTOR WHEN SOMEONE'S HANDS ARE IN THE CASSETTE
1
. Take out the MAGAZINES loaded with CUSTOMER FILMS to avoid film fogging.
2
. Run several cycles with test films.
3
. Check that the OPENER BRACKET is vertical when the CASSETTE is open.
4
. Check that the CASSETTE is correctly closed.

REPLACEMENT OF THE CASSETTE OPENER SOLENOID Y4.

1
. Switch off the ML2000 (ML2000 P).
2
. Take off the PANELS.
3
. Lower the CASSETTE OPENER to the approximate mid position. Unplug the
CASSETTE OPENER SOLENOID (Connector X40).
4
. Take out the 2 SCREWS from the CASSETTE OPENER SOLENOID.
Take care when replacing the SOLENOID. The ARMATURE is spring loaded and all parts may
KODAK AG, Stuttgart
WARNING
AREA.
NOTE
snap apart.
figure 2-14
2-17
REPLACEMENTS
6/97