ADJUSTMENTS
4
.
If the distance between FILM and SUCKERS is not correct, turn the END STOP
SCREW in or out as required.
The END STOP SCREW will lift the CASSETTE SUCKER BAR away from the film when it enters
5
.
Disable the CONTINUOUS LOOP MODE.
Pull out the CASSETTE
Switch off the ML2000 (ML2000 P). Wait 5 seconds and switch it on again.
6
.
Move SWITCH S1-1 on PCB A1 to OFF (down) for normal operation.
6/97
Do not forget to lock the NUTS on the END STOP.
figure 3-12
the ROLLERS.
NOTE
NOTE
3-10
SM 3477
KODAK AG, Stuttgart