Table of Contents
Advertisement
REPLACEMENTS
REMOVAL OF THE INPUT PANEL.
PURPOSE:
To get better access to the FRONT ROLLERS of the CASSETTE TRANSPORT, the INPUT
PANEL has to be removed. Use the following procedure.
1
.
Take out the INPUT FLAP MOTOR M1.
2
.
Take out the 4 MOUNTING SCREWS.
3
.
Disconnect the INTERLOCK REED SWITCH of the TOP COVER to prevent breaking
its wires when the INPUT PANEL is taken out.
4
.
Carefully pull out the INPUT PANEL. Secure it with a WIRE TIE to the FRAME.
5
.
When reinstalling the INPUT PANEL, ensure that the INTERLOCK SWITCH is
connected again.
6/97
NOTE
The FRONT PANEL must be removed first.
figure 2-2
figure 2-3
2-2
SM 3477
KODAK AG, Stuttgart
Advertisement
Chapters
Table of Contents
