Film Pocket Adjustment - Kodak Miniloader 2000 Service Manual

ADJUSTMENTS

FILM POCKET ADJUSTMENT

Special tools:
DENTIST MIRROR TL 2753
BLOW PIPE POSITIONER MAGAZINE TL-4582
Purpose:
This adjustment ensures that a FILM is picked up from the MAGAZINE.
1
. Take out all MAGAZINES from the ML2000 (ML2000 P).
2
. Empty one MAGAZINE in the dark-room.
3
. Take off the LID from the empty MAGAZINE.
4
. Draw a reference line 3 mm away from the leading edge of a film.
5
. Put this film into the empty MAGAZINE.
6
. Make sure that the film is at the MAGAZINE WALL
3 ± 0.5 mm
7
. Insert the prepared MAGAZINE into position 3.
8
. Take out the FILM CHUTE.
9
. Switch off the ML2000 (ML2000 P).
10.
Defeat the INTERLOCK with a PERMANENT MAGNET.
11.
Connect the LAP TOP COMPUTER to the ML2000 (ML2000 P) and start the
SERVICE SOFTWARE.
12. Move the FILM Pocket to level23.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU .......................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed ............................ press ENTER
UNIT DATA are displayed....................................................................... press ENTER
Select COMPONENT TEST from the MAIN MENU ........................ press ENTER
Select MAGAZINE MOTORS................................................................. press ENTER
6/97
.
figure 3-19
3-18
SM 3477
KODAK AG, Stuttgart