Replacement Of The Cassette Opener Motor M5 - Kodak Miniloader 2000 Service Manual

REPLACEMENTS

REPLACEMENT OF THE CASSETTE OPENER MOTOR M5

1
. Switch off the ML2000 (ML2000 P).
2
. Remove the PANELS.
3
. Take off the ACTUATOR
4
. Take out the 3 CASSETTE OPENER MOTOR MOUNTING SCREWS.
5
. Mark the position of the OPENER STOP PLATE.
6
. Take out the 3 OPENER STOP PLATE MOUNTING SCREWS.
7
. Take out the DOWEL PIN of the MOTOR SHAFT.
8
. Take out the STOP PLATE.
9
. Take off the DRIVE GEAR with the CHAIN.
Hold with one hand the CASSETTE OPENER MECHANISM. As soon as you take off the CHAIN,
the mechanism moves down and may squeeze in your fingers. When the GEAR is off lower the
10.
Take out the 2 MOUNTING SCREWS of the MOUNTING PLATE
11.
Disconnect SENSOR B15.
12.
Take off the SMALL DRIVE GEAR.
6/97
CASSETTE OPENER MECHANISM to its bottom position.
figure 2-10
WARNING
2-12
SM 3477
KODAK AG, Stuttgart