Cassette Area - Kodak Miniloader 2000 Service Manual

PREVENTIVE MAINTENANCE
3
. Check MAGAZINE DOOR hinges (may be loose).
4
. Drain and clean both water traps and check movability of drain piston.
5
. Check the FAN of the ELECTRONIC BOX.
6
. Check the FAN of the FILM CHUTE. (ML2000 P only!)

CASSETTE AREA:

CAREFUL WHEN WORKING IN THE CASSETTE OPENER AREA. THE OPENER MOTOR AND
THE OPENER MECHANISM ARE VERY STRONG. THEY CANNOT BE MOVED MANUALLY. THEY
MAY SQUEEZE YOUR HAND AND TRAP YOU IF YOU TRY TO STOP THEM MANUALLY. NEVER
START THE CASSETTE OPENER MOTOR WHEN SOMEONE'S HANDS ARE IN THE CASSETTE
1
. Remove any dust and dirt from BASE PLATE under CASSETTE TRANSPORT
ROLLERS.
2
. Check CASSETTE OPENER mechanism. The OPENER must be in the uppermost
position. Move the OPENER up and down. Check if at the end of the movement a high
pitch noise occurs. If so, the adjustment of the CASSETTE OPENER STOP PLATE is
not correct. Do the necessary adjustment. If necessary tension the OPENER CHAIN
first.
6/1997
WARNING
AREA.
figure 6-1
6-2
SM 3477
KODAK AG, Stuttgart