Double Sheet Sensor B59; Press Backspace 3 Times Select Leave Component Test - Kodak Miniloader 2000 Service Manual

SM 3477
4
. If the REFLECTIVE STICKER is not visible open the MOUNTING SCREWS of
SENSOR and move it up or down until the REFLECTIVE STICKER becomes visible. If
necessary adjust the position of the MIRROR.
5
. Tighten the SCREWS.
6
. Start the SENSOR TEST. Otherwise the SENSOR MAGAZINE EMPTY is not turned
on.
Press BACKSPACE twice to come back to screen COMPONENT TEST
Select SENSORS......................................................................................... press ENTER
Select SENSOR TEST WITH SOUND.................................................. press ENTER
7
. Rotate the GAIN ADJUSTMENT SCREW of the SENSOR counter-clockwise until the
indicator LED turns red. Now turn the GAIN ADJUSTMENT SCREW one step (20..30
degrees) clockwise until the INDICATOR LED is pulsating green.
Do not set the gain too high. It might be possible that the INFRARED LIGHT BEAM is reflected by
FILM in a MAGAZINE triggering the SENSOR and recognising the MAGAZINE as being empty.
8
. Exit the SERVICE MODE.
Press BACKSPACE 3 times
Select LEAVE COMPONENT TEST ..................................................... press ENTER
Select QUIT ML2000 SERVICE MODE ............................................... press ENTER
Select Quit the program ............................................................................ press ENTER

DOUBLE SHEET SENSOR B59

PURPOSE:
This adjustment makes sure that a DOUBLE FILM CONDITION is recognised.
FUNCTIONAL DESCRIPTION
If there are 2 or more FILMS between the DETECTOR ROLLERS the path of light in
SENSOR B59 is interrupted by AREA 2 of the DOUBLE SHEET SENSOR ARM.
If there is 1 FILM between the DETECTOR ROLLERS the light passes through the SLOT in
the DOUBLE FILM SENSOR ARM. During the adjustment this slot must be positioned
precisely over the light beam of the SENSOR B59.
If there is no FILM between the DETECTOR ROLLERS the path of light in SENSOR B59 is
interrupted by AREA 1 of the DOUBLE SHEET SENSOR ARM.
KODAK AG, Stuttgart
NOTE
figure 3-38
3-35
ADJUSTMENTS
6/97