Cassette Length - Kodak Miniloader 2000 Service Manual

SM 3477

CASSETTE LENGTH

Purpose:
This adjustment ensures that the correct CASSETTE LENGTH is measured.
BE CAREFUL WHEN WORKING IN THE CASSETTE OPENER AREA. THE OPENER MOTOR AND
THE OPENER MECHANISM ARE VERY STRONG. THEY CANNOT BE MOVED MANUALLY. THEY
MAY SQUEEZE YOUR HAND AND TRAP YOU IF YOU TRY TO STOP THEM MANUALLY. NEVER
START THE CASSETTE OPENER MOTOR WHEN SOMEONE`S HANDS ARE IN THE CASSETTE
1
. Take off the TOP COVER.
2
. Start the SENSOR TEST.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU .......................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed ............................ press ENTER
UNIT DATA are displayed....................................................................... press ENTER
Select COMPONENT TEST from the MAIN MENU ........................ press ENTER
Select SENSORS......................................................................................... press ENTER
Select SENSOR TEST WITH SOUND.................................................. press ENTER
3
. Manually actuate SENSOR B11/C_CE_CL CASSETTE CENTRED LEFT and fix it in
position with a piece of tape.
4
. With a CASSETTE carefully actuate SENSOR B12/C_CE_CR CASSETTE CENTRED
RIGHT.
SENSOR B12 has to be actuated when the CASSETTE is 1.5 ± 0.5 mm away from
5
.
the right-hand CENTRING BAR.
6
. If the distance is not correct, change the position of B12.
7
. Manually actuate SENSOR B12/C_CE_CR CASSETTE CENTRED RIGHT and fix it in
position with a piece of tape.
8
. Take off the tape from SENSOR B11.
9
. With a CASSETTE carefully actuate SENSOR B11/C_CE_CL CASSETTE CENTRED
LEFT.
SENSOR B11 has to be actuated when the CASSETTE is 1.5 ± 0.5 mm away from
10.
the right-hand CENTRING BAR.
11.
If the distance is not correct, change the position of B11.
12.
Take off the tape from SENSOR B12.
.
13
Start the option CASSETTE LENGTH of the SCREEN PARAMETER.
Press BACKSPACE 3 times
Select LEAVE COMPONENT TEST ..................................................... press ENTER
Select CHANGE ML2000 DATA from the MAIN MENU ............... press ENTER
Select CHANGE PARAMETER .............................................................. press ENTER
Select CASSETTE LENGTH .................................................................... press ENTER
KODAK AG, Stuttgart
WARNING
AREA.
3-11
ADJUSTMENTS
6/97