Table of Contents
Advertisement
SM 3477
FILM POCKET
CLEAN THE SUCKERS
The main cause of SUCKER MARKS is contamination of the sucker surface. This
contamination can be any number of substances ranging from natural body oil, sweat or even
KODAK Intensifying Screen Cleaner or anti static Solution (which has sometimes been
recommended for cleaning SUCKERS!).Do not use KODAK Intensifying Screen Cleaner and
Anti Static Solution to clean the SUCKERS!
This procedure should be followed if the SUCKERS are touched or if new ones are fitted.
1
.
Abrade the surface of the SUCKER carefully using Emery Cloth grade 400 or a
similar material.
2
.
Lightly coat the SUCKER with NATURAL(un-perfumed) talcum powder, available from
chemists and pharmacies.
FILM POCKET CHAIN
Prerequisites:
When doing this adjustment, the unit must be levelled.
Purpose:
This adjustment ensures that there is no offset between the left and the right CHAIN and that
the FILM POCKET DRIVE SHAFT is parallel to the BASE PLATE of the MAGAZINE
CHAMBER.
After you have done this adjustment, check the adjustment of the FILM POCKET
1
.
Switch off the ML2000 (ML2000 P).
2
.
Take off the PANELS.
3
.
Take out the FILM CHUTE.
4
.
Take out all MAGAZINES.
5
.
Disconnect the STEPPER MOTOR
6
.
Manually move FILM POCKET to a position so that the top surface of one of the
counterweights is level with the top edge of the GUIDE RAIL.
COUNTER WEIGHT
left
KODAK AG, Stuttgart
NOTE
NOTE
GUIDE RAIL
figure 3-16
3-15
ADJUSTMENTS
COUNTER WEIGHT
right
6/97
Advertisement
Chapters
Table of Contents
